Elmeasure Digital Panel Meter

Product Details:

• Overload Tripping Logic
• Automatic DG Start/Stop
• Fire/External Fault Trip
• Safe and Rapid Switching
• Automatic Transfer
• Automatic start/stop operation of DG on mains failure
• Overload tripping (optional) with inverse curve logic
• Automatic transfer switch are provided with fire alarm / external fault trip feature
• Inbuilt control switch for selecting auto/manual mode
• Automatic transfer switch have high capacity to withstand short circuit
• Optional RS485 communication and cloud

• Monitor real-time system voltage and frequency
• Monitor source healthiness and output for both Source
• Automatic transfer switch for commercial centers, manufacturing, medical facilities and data centers.

Product Details:

• User friendly contactless prepaid metering solution
• Remote Display Unit allowing customer to recharge and monitor consumption
• Integration of Gas and Water with the electrical parameters thereby, extending the flexibility for the user to budget expenses
• Tripping of EB or DG consumption at pre-determined set point for protection and effective use of energy

• Shopping complex
• Residential layouts / apartments
• Utility
• Employee quarters

Elmeasure Model Nos:

• PE 5121 (Single Phase - Whole current) - Prepaid / Postpaid
• PE 5120 (Three Phase - Whole current) - Prepaid / Postpaid
• PE 5120 (Three Phase - CT Operated) - Prepaid / Postpaid

Product Details:

Salient Features:

• Inbuilt Selector Switch
• High resolution reading with autoscaling
• Suitable for industrial panels, gen-sets, solar, pump control panels, etc.
• Optional RS485 for data collection
• Optional easy interface to PLC through modbus protocol

Applications:

• AC & DC Measurement
• Equipment Monitoring
• Genset, Solar and UPS applications
• In control panel to measure different electrical loads

Product Details:

• Easy navigation
• Event recording with time stamp (all basic & power parameters)
• Unbalance load and voltage with calculated neutral current
• Dynamic communication
• Optional digital output for all basic and power parameters

• Monitoring Electrical Parameters
• Control / protection
• In control panel to measure different electrical loads
• Generator & control panel

Product Details:

• Inbuilt Selector Switch
• High resolution reading with autoscaling
• Suitable for industrial panels, gen-sets, solar, pump control panels, etc
• Optional RS485 for data collection
• Optional easy interface to PLC through modbus protocol

• AC & DC Measurement
• Equipment Monitoring
• Genset, Solar and UPS applications
• In control panel to measure different electrical loads

• Elmeasure Model Nos. – ALPHA +3A, ALPHA +3V, ALPHA +A, ALPHA +V, ALPHA +ADC, ALPHA +VDC, ALPHA Hz, ALPHA +RPM, MICRO ALPHA VAF, MICRO ALPHA +3A, MICRO ALPHA +3V, MICRO ALPHA +A, MICRO ALPHA +V, MICRO ALPHA +ADC

Product Details:

• Microcontroller based automatic source changeover with neutral isolation
• Intelligent re-connection once trip has occurred due to either overvoltage or overload
• Energy, Current, Voltage measurement for DG & Current measurement for EB
• Programmable threshold setting for both source independently

• Precise and accurate in measuring load current – true RMS
• Overvoltage and Undervoltage cut-off for EB and DG (optional)
• LED indication of all operational status.
• ACCL Logic for Currents up to 120 Amps is available

Product Details:

• Directly replaces 2 energy meters
• Sensing dual source through 240V connection
• Dual row display switches based on the source
• Displays basic and most of the power parameters
• Optional digital output separately for EB or DG parameters

• To measure dual power source
• Dual source energy billing
• Industries, residential, commercial buildings
• Generator & control panels

Product Details:

• True RMS Measurements
• K Factor V&A all three Phase
• % of Unbalance V&A for all three phases
• THD for Voltage & Current
• Optional 4 Potential free contacts with programmable time delay
• Optional Two Independently programmable analog output
• Optional Individual Harmonics up to 31^st Level

• Monitoring Electrical Parameters
• Control / protection
• In control panel to measure different electrical loads
• Generator & control panels

Product Details:

• Avoids the requirement of 2 different meters (energy and VAF in one)
• Reduces the cost and simplify wiring
• High resolution reading with auto scaling in LED
• Energy consumption in counter even if CT is reversed

• Easy configuration of Gen-set Controllers
• Monitor health & Readiness
• Remote operation & control
• Multiple alarms & notifications

Product Details:

• Directly replaces 2 energy meters
• Sensing dual source through 240V connection
• Dual row display switches based on the source
• Displays basic and most of the power parameters
• Optional digital output separately for EB or DG parameters

• To measure dual power source
• Dual source energy billing
• Industries, residential, commercial buildings
• Generator & control panels

Product Details:

• Inverse curve - Trip time to leakage current
• Field programmable trip current and trip time through front panel keys with password protection
• Continuous leakage current display (Programmable)
• Continuous Display of Trip Leakage current (Programmable)
• Continuous scrolling display for set Current and set Time

• Protects control panels and switch boards from flame leakage
• Protects motors / transformers / feeders / DG etc.,
• Complete protection for oil refineries, pulp industries, mining industry, electrical distribution & control engineering.
  
  

Product Details:

• Measures Unbalance, harmonics, inrush, transients, sag and swells
• Lightweight, handheld, compact design with Magnetic Latch
• High capacity rechargeable battery pack providing 24 hours backup
• Auto recognition & integrated with 2/3/4 wire connection system
• Micro SD card interface for data storage and subsequent analysis
• Connect to PC via USB cable for real-time analysis

• Energy auditing
• Higher accuracy of Power Quality Measurements
• Continuously monitors & analyze electricity lines for disturbance
• Allows reliable delivery of energy & protects equipment

Product Details:

• User programmable
• Three phase sensing (it gives accurate measurement of PF
• Automatic or manual control (manual control with power backup option)
• Four quadrant operation
• Optional RS485 communication interface

• Can work for any electrical Incomer
• Fixed power factor corrections individual (e.g. motor, transformers, lighting, etc.)
• Group fixed power factor correction (several equipments connected in a group)
• Capacitor banks of tuned and detuned

Product Details:

Product Details:

Product Details: